As a pottery artist, keeping your pottery wheel clean and functioning properly is essential to your craft. But cleaning all of the nooks and crannies of a pottery wheel can be a daunting task. Over time, clay gets piled up in hard-to-reach places and the wheel head gathers dust and debris. If not cleaned regularly, that build-up of material can damage your wheel or affect its performance.
In this blog post, I will share my simple and effective method for thoroughly deep-cleaning your pottery wheel. With just a few basic supplies and some elbow grease, you can have your wheel looking and working like new. Let’s get started on how to clean pottery wheel and I’ll show you how to bust through that crusty clay build-up and return your wheel to top working condition.
What You Will Need
- Bucket of Warm Water
- Soap or Mild Detergent
- Sponge or Soft Cloth
- Toothbrush or Small Cleaning Brush
- Vinegar (Optional)
10 Step-by-step Guides on How to Clean Pottery Wheel
Step 1: Clear the Wheel Head
Begin by removing any pots, clay scraps or tools from your wheel head. You want to make sure the surface is clear before moving on to the next step. You can also remove the wheel head if it is easy to do so, but it’s not necessary. It’s important to note that if you are working with an electric wheel, make sure to unplug it before beginning the cleaning process. But if you have a manual wheel, just make sure to stop the wheel from spinning before continuing with the cleaning.
Step 2: Prepare Your Supplies
Gather your supplies and set them up near your wheel for easy access. Fill your bucket with warm water and add a small amount of soap or mild detergent. If you prefer, you can also use vinegar instead of soap as it is a natural cleaning agent that helps remove stubborn clay buildup. The sponge or soft cloth will be used to clean the surface while the toothbrush will come in handy for smaller crevices and hard-to-reach areas.
Step 3: Wet the Sponge/Cloth
Dip your sponge or cloth into the bucket of warm water and wring it out. You want it to be damp, but not dripping wet. Make sure to use a clean sponge or cloth to avoid spreading any dirt or debris onto your wheel. Otherwise, you will just end up making more work for yourself. It’s also important to use a soft sponge or cloth to avoid scratching the surface of your wheel. You can use an old T-shirt or microfiber cloth for this step.
Step 4: Wipe Down the Wheel Head
Using the damp sponge or cloth, gently wipe down the surface of the wheel head. If there is a lot of built-up clay, you may need to apply some pressure and scrub in circular motions to remove it. Be careful not to press too hard, as this can damage the surface. Continue wiping down until all visible clay has been removed from the wheel head.
Step 5: Clean Underneath the Wheel Head
Next, you will want to clean underneath the wheel head where it attaches to the base of your pottery wheel. This area is often overlooked but can gather a significant amount of clay and debris. Use your sponge or cloth to wipe away any dirt and grime, making sure to reach all the way to the edges. It may be helpful to use a toothbrush for this step as well. The goal is to leave no trace of clay or dirt behind.
Step 6: Clean the Wheel Pedal
If you have an electric wheel, now is a good time to also clean the wheel pedal. Dust and debris can accumulate here as well, affecting its performance. Wipe down the pedal with your damp sponge or cloth, making sure to get into any crevices. If there are any hard-to-reach areas, use a toothbrush for more precise cleaning. You can also use a small amount of vinegar on the cloth to help remove any stains or build-up.
Step 7: Rinse and Repeat
After wiping down the wheel head, rinse out your sponge or cloth in clean water and wring it out. Then go over the surface again to remove any soapy residue. This will also help ensure that all traces of clay have been removed. If necessary, you can repeat this step until the wheel head is completely clean. Just make sure to rinse out your sponge or cloth in between each wipe-down.
Step 8: Clean the Splash Pan
If your pottery wheel has a splash pan, take the time to clean it out as well. Remove any clay scraps or debris and wash the pan with warm soapy water. You can also use vinegar here if needed. Make sure to dry it thoroughly before placing it back on your wheel. You want to avoid any moisture that may cause clay to stick to the pan again.
Step 9: Dry Thoroughly
After cleaning, make sure to dry off all surfaces of your pottery wheel. You can use a clean towel or paper towels to get rid of any excess moisture. Check all the nooks and crannies to make sure they are dry as well, as lingering moisture can cause mold or damage over time. It’s best to let your wheel air dry for a few hours before using it again. The last thing you want is to get water or soap on your freshly thrown clay.
Step 10: Clean Your Tools
Once your pottery wheel is clean, take the opportunity to also clean any tools that may have accumulated clay or dust. You can use the same warm soapy water and sponge/cloth to wipe them down. Make sure to dry them thoroughly before putting them away. This will help keep your tools in good condition and avoid any cross-contamination of clay on future projects.
Additional Tips for Maintaining a Clean Pottery Wheel
- Use a Clay Trap to Catch Excess Clay and Prevent It From Clogging Your Plumbing System.
- Cover Your Wheel When Not in Use to Protect It From Dust and Dirt.
- Clean the Surface of Your Wheel Head Before Each Use to Avoid Any Contamination on Your Clay Pieces.
- Regularly Check and Clean Any Filters or Vents on Your Electric Wheel for Optimal Performance.
- Use a Dust Mask When Cleaning to Avoid Inhaling Any Clay Particles.
- Consider Investing in a Wheel Cover or Splash Pan Liner for Easy Clean-Up.
Now that you know how to clean pottery wheel, you can keep your equipment in top shape and focus on creating beautiful pieces of pottery without any interruptions. Happy potting!
–
Frequently Asked Questions
Q: How Often Should I Clean My Pottery Wheel?
A: It is recommended to clean your pottery wheel after each use and do a more thorough cleaning once a week. However, if you notice a build-up of clay on your wheel, it’s best to clean it immediately to avoid any damage.
Q: Can I Use Any Type of Soap or Cleaner to Clean My Wheel?
A: It’s best to use mild soap or detergent, such as dish soap, and warm water. You can also mix in a small amount of vinegar for tougher stains. Avoid using harsh chemicals or abrasive cleaners, as they can damage the surface of your wheel.
Q: How Do I Clean the Bat Pins on My Wheel?
A: To clean the bat pins, simply wipe them down with a damp cloth or sponge. If there is any clay buildup, you can use a toothbrush to scrub it off. Make sure to dry the pins thoroughly after cleaning.
Q: Can I Use a Pressure Washer to Clean My Pottery Wheel?
A: No, pressure washers are not recommended for cleaning pottery wheels. The high pressure can damage the delicate parts of your wheel and cause water to seep into electrical components. Stick to using a sponge or cloth for gentle yet effective cleaning.
Conclusion
In conclusion on how to clean pottery wheel, cleaning your pottery wheel may seem like a daunting task, but it is an essential step in maintaining the overall health and longevity of your equipment. By following these simple steps, you can ensure that your pottery wheel stays in top condition for many years to come.
Remember to always clean after each use, remove any excess clay, and regularly oil and inspect all moving parts. Not only will this keep your pottery wheel functioning properly, but it will also help prevent any potential accidents or injuries. We have covered various techniques that you can use to clean different types of wheels, so whether you have an electric or kick wheel, there is a solution for you.
Additionally, don’t forget about the importance of personal protection while cleaning – be sure to wear gloves and a mask if needed. Lastly, don’t hesitate to seek professional help if you encounter any major issues with your pottery wheel. Cleaning is just one aspect of maintenance; regular check-ups and tune-ups by a qualified technician can save you time and money in the long run. So go ahead and give your pottery wheel some love and care – it will thank you with beautifully crafted pieces for years to come. Happy potting!